Distributor CCTV Training Video Analytics Cameras

Viseum IMC™ and locally processed Viseum iVOS™ Advanced Video Analytics Software Technology Services

Viseum Certified Corporate Distributors

> Viseum’s Certified Corporate Partner Programme <

CCTV Training course benefits of Viseum Licensing and Certification

Technical Training Programme Benefits

This CCTV training programme is for the Viseum IMC models. Using the Viseum Intelligent Virtual Operator Software (Viseum iVOS) analytics operating locally to the camera installation. This course takes 5 working days with each level taking 1 day to complete.

Viseum IMC and iVOS

Level 1: End User Operational CCTV Training.
Level 2: System Administrator.
Level 3: Remote Site Installation and Maintenance.
Level 4: Viseum IMC Commissioning Expert.
Level 5: Viseum Certified Corporate Distributor.

Viseum IMC and iVOS Level 1: End User Operational CCTV Training

This training course is designed to enable professional CCTV security staff to fully exploit the spectrum of unique capabilities that Viseum cameras and iVOS software capability offer. To automatically address each remote site’s security issues. Freeing up monitoring staff for other tasks. This will enable the user to swiftly optimize situational awareness and security within any given areas of the Viseum network.

Start state:

A fair knowledge of CCTV operations, or working knowledge of the security challenges within their area of responsibility.

Aim:

To use the Viseum cameras to automatically generate situational awareness. Heightened long-term security, surveillance and deterrence at each remote site.

Objectives:

By the end of this session learners will be able to:

Create automated site surveillance rules for risk management, suspect target allocation and prioritization, for each remote site.
Operate Viseum cameras in their live proactive operational mode to deal with automatically detected security threats.
Operate Viseum cameras in decision support of security patrols and first responders. With situational awareness and initiative to act before, during or after an incident.
Operate Viseum cameras in their passive standalone operational mode and deal with evidence recovery.

A typical example of industry-standard security process without the use of Viseum cameras:

1) A suspect break into a perimeter is automatically detected and automatically alarmed to command control.

2) A security operator first identifies the section of the perimeter where the potential breach took place.

3) The security operator then spends valuable time:

- 1. Locating and accessing the nearest PTZ Camera.
  2. Controlling this PTZ Camera to monitor the section of the perimeter in order to:
    - Look around the area for the suspect.
    - Confirm if the incident should be dealt with further.

Heightened security and performance training with the use of Viseum cameras:

This CCTV training course will cover how all of these actions are processed automatically by the Viseum camera system. The security operator is then fully primed with the complete Ground Truth for the correct response.

Viseum IMC and iVOS Level 2: System Administrator

This training course allows the system administrator to fully exploit and optimize Viseum’s unique camera and iVOS software capabilities. The number of Viseum cameras required will always be far fewer and more widely dispersed than for any other system. The unrivalled capacity of the Viseum cameras can provide security and monitoring capability for numerous additional agencies. This training is designed for a System Administrator to optimize the network design. To configure and manage the Viseum cameras in automated support of operator staff. Also meeting the multiple requirements, and optionally prioritize access levels of the various additional stakeholders of each Viseum camera installation.

Start state:

Current knowledge in configuring and managing IT systems and conventional IP camera networks. A seasoned professional security staff and resources manager.

Aim:

Manage the best practice implementation and use of Viseum cameras and iVOS system.

Objectives:

By the end of this session learners will be able to:

Understand and exploit the unique aspects of the Viseum camera and iVOS operating software.
Design a Viseum camera network and designation of appropriate automated monitoring mode for each remote site.
Manage the overseeing of installation maintenance – 1st line fault diagnosis and reporting.

Typical examples of network design improvements:

1) The Viseum camera is installed plug-and-play. This eliminates the lengthy procurement and installation processes of standard technologies, requiring considerable camera and cabling infrastructures.

2) The automation of the Viseum IMC and iVOS software analytics operates locally to the camera installation. Many remote sites will no longer require costly high-bandwidth communications to the command control. This means that costly fibre connections can be replaced to benefit from lower bandwidth wireless mobile phone services.

Typical examples of performance improvements:

1) This new automated surveillance capability significantly changes how much time each remote site requires proactive camera control and viewing attention. Also, how many remote sites will now benefit from reactive surveillance.

2) This new performance will show greater operational savings with improved key performance indicators. > download UK savings example <

Viseum IMC and iVOS Level 3: Remote Site Installation and Maintenance

The Viseum Installer is the corporate representative at the Viseum/Client interface. For the reputation of Viseum and its Certified Partners, this training must leave experienced Installers equipped with the necessary attitude, skills and Viseum-specific knowledge to impress. The customer has invested in the best-of-breed security and surveillance system. The customer expects and deserves swift and fault-free security and situational awareness. The Installer has two key roles of installation and maintenance in delivering this. It is imperative that their skills, demeanour, and knowledge create a positive and lasting impression while they determine the customer’s needs and installs the requisite Viseum cameras.

Start state:

Qualified CCTV installer.

Aim:

To understand the technical installation process for the 3 deployment categories of all models of Viseum camera.

Objectives:

By the end of this session learners will be able to:

Install and maintain the Viseum camera system at the remote site in preparation for connection to the remote commissioning service.
Conduct a site survey and QA testing of existing cabling and equipment for its suitability to support Viseum equipment.
Execute the site maintenance process to produce rapid fault finding and repair for the client.
Conduct best practice use of field manuals below:

Field Manuals:

Technical.
Deployment.
Risk assessment.
Health and Safety.

Viseum IMC and iVOS Level 4: Viseum IMC Commissioning Expert

The final stage in the generation of unparalleled security and situational awareness is delivered during the commissioning process. This training is designed to ensure that correctly installed and aligned Viseum cameras and iVOS are swiftly commissioned. This training contains everything necessary to expand an IP CCTV professional’s knowledge to encompass and exploit our unique capabilities.

Start state:

An experienced and certified security professional with IP camera and digital systems expertise.

Aim:

To swiftly and correctly commission a Viseum camera system to meet the requirements of administrators and security staff at any given remote site.

Objectives:

By the end of this session learners will be able to:

Fully understand all iVOS software features and functionality of the Viseum camera system.
Translate the security conditions and requirements of local staff, into meaningful and effective configuration of the Viseum system for each remote site.

Viseum IMC and iVOS Level 5: Viseum Certified Corporate Distributor

In certifying a supplier as a Certified Corporate Distributor, Viseum is trusting its reputation and wellbeing to its new partners. This training course builds upon what must be a wealth of experience and professional reputation within a region. It will cover Viseum’s best-practice in sales techniques, corporate networking, conferencing and exhibiting. As well as the development of CCTV training and partner business models. Distributor training has more focus on presentational requirements.

Start state:

Experienced security systems distributor – recognized as an expert in digital systems.

Aim:

To certify distributor in the full spectrum of Viseum focused sales, marketing, distribution, integration and training best practices.

Objectives:

By the end of this session learners will be able to:

Acquire their first Viseum resellers and their first Viseum end users
Run their own Viseum sales distribution network of resellers. Use proven techniques driving high-volume sales, including lead generation, industry campaigns, and best practice end-to-end sales processes.
Understand and communicate the unique aspects of the Viseum iVOS operating software.
Understand and communicate the benefits of each Viseum camera deployment category:
- Permanent – fixed onto camera pole or building.
- Temporary or Redeployable – self-contained units fixed onto temporary construction or street lighting column.
- Rapid deployments – completely self-contained mobile CCTV column.

Understand the range and capabilities of Viseum camera/sensor models which may be installed at any site as required:
- Optical – day and night with standard sodium street lighting out to 320 m of populated or unpopulated environments.
- IR – out to 200 m of detection and confirmation of objects.
- Thermal – out to 39 km of detection and confirmation of objects.